Evaluation Sets

You already know that our micropumps are a relevant supplement or alternative for your application? But perhaps you are just guessing what possibilities our pumps open up for you.

In any case, our Evaluation Sets are the perfect place to get started in this topic.

 

For this reason we have developed different packages including hose, hose clamps and the necessary cables for different applications.


For example, if you are looking for a micropump that already has the voltage, frequency, and voltage configuration is already set via a driver, you will find here what you are looking for. However, if you want to integrate the driver chip directly into your own application in order to operate our micropump, then of course this is also possible.

And much more.

 

In all cases, we can adapt the electronics to their future application and thus ensure mass production for our customers in a short time.

 

All this is Bartels: Development, production and service.

Go! Set

​Consisting of:

  • 3 pumps

  • 1 mp-x

  • 1 mp6-con

  • 1 mp-t

Instead of the driver, this set has a much more flexible desktop control unit, where frequency and voltage are entered via push buttons and shown on the display. The pulse shape can be switched between sine, square and SRS, whereby the SRS signal is a special, slightly smooth square wave signal that combines high performance with quiet operation. In addition, the box can be externally controlled via a USB port. The necessary software is available via download.

The set includes hose, hose clamps and the necessary cables.

Quad Eva Set

Consisting of:

  • 4 pumps

  • 1 mp6-QuadEVA

  • 1 mini USB-Kabel

  • 1m mp-t

 

The set allows the operation of up to four mp6 with a much more flexible driver.

The driver is mounted on a small board and has a preset voltage and frequency configuration as well as power supply. This makes a quick first test possible immediately after receiving the pump.

This driver can be configured via a USB port. You can freely define as to how many and which of the four mp6 connectors are controlled. Frequency and voltage are flexible, but then apply equally to all controlled pumps. Both the electrical power and the maximum frequency are significantly higher than the OEM.

The set includes hose, hose clamps and the necessary cables and power supply.

basic Set

​Consisting of:

  • 3 pumps

  • 1 mp6-EVA (inkl. mp6-OEM)

  • 1 mp-t

The set allows for a quick first test to clarify whether an application with the mp6 makes sense. The pump and driver are constructed to be technically very simple and very small. The reason: The driver is mounted on a small board, through which the configuration of voltage, frequency and power supply is preset. This allows for a test to be performed immediately after receipt of the pump. Additional jumpers on the board can partially adjust the configuration.

The set includes hose and hose clamps.

Quad OEM Set

Consisting of:

  • 4 pumps

  • 1 mp6-QuadOEM

  • 4 mp6-mol

  • 1m mp-t

The set is designed for 4 pumps and looks like the OEM electronics, but is slightly larger. It is intended for experienced quad-driver users who want to integrate the chip directly into their own application.

The set includes hose, hose clamps and the necessary connectors.

pro Set

Consisting of:

  • 5 pumps

  • 5 mp6-OEM

  • 5 mp6-mol

  • 1 mp-t

The set is intended for experienced users who want to integrate the driver chip directly into their own application in order to operate the mp6.

The set includes hose, hose clamps and the necessary connectors.

Quad KEY Set

Consisting of:

  • 4 pumps

  • 1 mp6-QuadKEY (inkl. mp6-QuadOEM und Pin-kompatiblem Mikrokontroller)

  • 1 mini USB-Kabel

  • 1m mp-t

The driver comes from the high performance quad EVA, but is delivered in this set directly with an Arduino microcontroller board. With this set, you can realise complex control tasks very quickly, and easily integrate components such as sensors, etc. The Arduino is preconfigured with a launcher for a quick first test. For reprogramming the necessary software is available via download.

 

The set includes hose, hose clamps and the necessary cables.

REQUEST A QUOTE.

arrow&v
arrow&v
 

© 2019 Bartels Mikrotechnik GmbH

Company Logo (RGB-screen).png
withpassion.png
  • Grau YouTube Icon
  • Grau LinkedIn Icon
  • Grau Facebook Icon
  • Grau Twitter Icon
  • Grau Icon Instagram